Product characteristics
03
www.katusensor.com
The all-metal casing design, with a highlighted LED digital display, enables the product
line to be used in a variety of industrial applications. The three-button design and menu
make the product more convenient to use, and a variety of connection methods can fully
meet various specific installation needs. The device, which can rotate at 330°, guarantees
the best viewing Angle in different mounting modes.
Switching function
If the switch is higher or lower than the set switching limit (SP, rP), its switching state is changed.
The following switch functions can be selected:
•
Hysteresis function normally open:
= [Hno]
(→
Figure 1）
•
Hysteresis function normally closed:
= [Hnc]
(→
Figure 1）
First set the switch point:
(SP)， Then set the reset point: (rP)。
If SP changes again, the hysteresis will change with it.
•
Window function usually open:
= [Fno]
(→
Figure 2）
•
Window function normally closed:
= [Fnc]
(→
Figure 2）
The width of the window can be set by the difference between SP and rP.
SP = Upper limit value, rP = Lower limit value.
SP
rP
Figure 1
Figure 2
P =
System pressure；
HY = lag;
FE = window
