background image

WARRANTY 

INFORMATION

Warranty period on this system: 
10 years from date of purchase

Terms and conditions

All warranty claims must be made in writing within 14 days of 
the appearance of the defect.

Incorrect installation or work done by a non accredited 
Kattsafe system installer will void all warranty rights.

Systems that have been installed using non proprietary 
equipment will void all warranties.

System roof/cladding and concrete penetration seals are not 
covered in this warranty.

Systems/components that have not been maintained in 
accordance with manufacturer’s/legislative requirements will 
void warranty.

Systems used by incompetent persons or use with non 
compatible accessories ie. harness gear, lanyards, travellers, 
fall arrestors etc. will void warranty.

Systems/components used for purposes other than their 
intended use will void warranty.

General wear and tear is expected and will depend on the 
frequency of use and is not covered by warranty.

Should you have a warranty claim as a result of a defect 
the following procedure must be followed:

Identify the following information:

 

– The product/system name and code number.

 

– The date of purchase/installation.

 

– Installation company details.

 

– The installation identification number.

 

– The name of the company using this system.

 

– A description of the defect/warranty claim.

 

– The periodic system maintenance report.

Forward the above information to [email protected] 
or contact technical helpline, 1300 301 755.

Copyright, trademarks and product codes are property of Kattsafe. Patents and 
design registrations may apply to these products.

18

Kattsafe / Static line / Operation manual

Summary of Contents for SL1




















Reviews: