Kattsafe RL30 Series, Installation Manual, Page: 79 / 81

Maximum safety. Minimum Fuss. 79 Kattsafe / RL30 Series Installation Manual
MAINTENANCE, CLEANING AND STORAGE
Maintenance with aluminum fixed ladder systems is relatively minimal. Any repairs to the ladder systems can only
be performed by Kattsafe or an entity approved by Kattsafe. Contact Kattsafe, for all maintenance and repair
needs at 888-637-7872.
Cleaning after use is important for maintaining the safety and longevity of the ladder systems. Remove all dirt,
corrosives and contaminants from the ladder systems before and after each use. If the system cannot be cleaned
with plain water, use mild soap and water and rinse and wipe dry.
There are no lifetime limitations for the ladder systems as long as they pass the pre-use and annual inspection
requirements specified by these instructions.
If ladder system is being stored prior to installation, ensure it is stored in a dry environment where it will not be
affected by excessive moisture, chemicals, excessive building vibration or other degrading elements.
INSPECTION
Refer to these instructions for proper inspection procedure.
Prior to each use, inspect the ladder systems for any deficiencies including, but not limited to deformation, pits,
burring, corrosion, sharp edges, cracking, rust, loose screws, weld damage, rough surfaces, expansion of splice
joins, excessive heating, alteration, damaged parts, instability, movement and missing or unreadable labels.
IMMEDIATELY remove from service if defects or damage are identified. Any missing labels require the system to be
removed from service.
Kattsafe requires the ladder systems to be checked at least every 12 months by a competent inspector in
accordance with relevant OSHA regulations and manufacturers guidelines. If this inspection is not performed, the
warranty is void and all/increased liability will be the responsibility of the customer/end user. Inspections must be
recorded in this manual and initials input in the inspection grid below:
Date of first use: Installed by:
Competent person to inspect product and initial on the grid below.
Year Jan. Feb. Mar. Apr. May Jun. Jul. Aug. Sep. Oct. Nov. Dec.
20__
20__
20__
20__
20__
20__
20__
20__
20__