Kattsafe RL30 Series, Installation Manual, Page: 30 / 81

kattsafe.com | sales@kattsafe.com | 888 637 7872 30 REV: 3/18/2024
RL32 Installation: Step 5
Insert the Kattsafe Top-Rail Endcaps into the Top-Rail Extrusions. Fasten each End Cap
using (1) 3/4in S/S TEK Screw on the underside of the Top-Rail Extrusion.
When fastening, ensure that there is enough gap between the flange of the TEK Screw
and the wall of the Ladder Head Extrusion so that they do not interfere.
Space TEK Screw
3
8
in
from End of Top-Rail
5
Insert the Kattsafe top-rail end caps into the top-rail extrusions. Fasten each end cap using
(1) 3/4 inch S/S Tek Screw on the underside of the top-rail extrusion.
When fastening, ensure that there is enough gap between the flange of the Tek Screw and
the wall of the ladder head extrusion so that they do not interfere. See graphic above.