Kattsafe RL30 Series, Installation Manual, Page: 26 / 81

kattsafe.com | sales@kattsafe.com | 888 637 7872 26 REV: 3/18/2024
RL32 Installation : Step 1
Measure 1-7/8 in (49mm) from the bottom end cap on the ladder head. Place the top of the
T-bracket on the ladder head at this measurement. Fasten the T-Bracket using (2) Kattsafe
T-Bolts on the inside T-Slot of the ladder body. Repeat this step for the other side of body.
IMPORTANT NOTE: This measurement should mean that the platform is level with the
top rung of the ladder body once installed. Once the platform is installed, double
check that it is level.
!
1
7
8
in
[49 mm]
1
Measure 1-7/8 inches (49mm) from the bottom end cap on the ladder head. Place the top
of the T-bracket on the ladder head at this measurement. Fasten the T-bracket using (2)
Kattsafe T-bolts on the inside T-slot of the ladder body.
Repeat this step for the other side of the ladder body.
IMPORTANT NOTE:
This measurement should mean that the platform is level with the top rung of the ladder
body once installed. Once the platform is installed, double check that it is level.