Kathy’s
Quick Reference
Kathy’s
Quick Reference
1.
ISSUE:
Hook assembly, needle bar and mechanics need oil
FIX:
Oil your Block RockiT before use and
after every 8 hours of use
2.
ISSUE:
Bobbin winder is continually running
FIX:
When not winding a bobbin, the winder cam should be
pushed back away from bobbin where it will stop running
3.
ISSUE:
Hopping foot is hitting the needle plate
FIX:
Hopping foot should be at a height where a credit card
can fit between it and needle plate. Also make sure the needle
plate is installed correctly
TROUBLE SHOOTING:
MACHINE IS RUNNING ABNORMALLY LOUD
KATHY SAYS: Keep your Block RockiT manual nearby while
you’re quilting. Don’t forget to check our helpful online
videos found at videos.kathyquilts.com and YouTube!
1-2 Drops
1-2 Drops
Tilt the
Display
Back
1-2 Drops
QUESTIONS? CALL US:
(888) 826-0222
1.
ISSUE:
Machine may be improperly threaded
FIX:
Make sure thread passes through all tensioners and
thread guide. Check thread mast and thread spool
2.
ISSUE:
Thread tension too tight
FIX:
Loosen tension by turning tension knob counter clock-wise
3.
ISSUE:
Hesitating too long at one point
FIX:
Sewing in one place may cause thread to break. Move
machine quicker within speed limitations so stitches don’t
overlap or build up
4.
ISSUE:
Bobbin not inserted or wound correctly
FIX:
Check bobbin to ensure it is properly wound and inserted
correctly into the bobbin case.
(SEE MANUAL PAGES 15-16)
5.
ISSUE:
Hook holder pressing against assembly or it may have
insufficient space
FIX:
Readjust the hook holder
(SEE MANUAL PAGE 28)
6.
ISSUE:
Timing needs to be adjusted
FIX:
If needle is hitting the hook, the thread will break.
Follow timing instructions and/or watch our video on timing.
(SEE MANUAL PAGE 30)
7.
ISSUE:
Needle bent or burred
FIX:
Replace the needle
TROUBLE SHOOTING:
THREAD BREAKING
KATHY SAYS:
Remember to use
quality thread made
specifically for use
in quilting machines.
QUESTIONS? CALL US:
(888) 826-0222
