background image

Kathy’s

 

Quick Reference 

Kathy’s

 

Quick Reference 

4.  Lay the quilt batting on top of the quilt back layer. Pat it down

flat. Tuck that batting in between the two rails (the quilt back

rail and the quilt top rail). Let the batting pool onto the floor.

5.  Pull up the quilt top layer. Match the pin to the mark on the take

up rail. Lay it down on top of the batting and smooth it down.

6.  Starting at the left side, use your Block Rockit (or other quilting

machine), to make a straight stitch just at the edge of the quilt

top so it will hold down to the quilt back. Kathy likes to go right

next to the edge, or even serpentine back and forth onto the

quilt, off the quilt, onto the quilt until you reach the right end.

7.  Now you can tighten up the Quilt Top rail. Smooth it all flat with

your hand, and make sure your quilt on the rail is smooth.

8. Attach your Bungee Side Clamps.
9.  

DO NOT OVERTIGHTEN the quilt!

  The quilt will quilt better with

less skipped stitches if the quilt is slightly ‘saggy’ and not taut!

Now you are ready to quilt.

1.  

Always pin the quilt back on the quilt back rail FIRST.

Put a pin in the center of the quilt backing on both ends. Match

up the pin to the center line of the quilt backing cloth leader.

Hold these layers together (like a seam in clothing) and start

pinning the pins parallel to the edge, about 1/4 or 1/8” from the

edge (pins close together-head to tail).  Roll it all the way up.

2.  Go to the back of the frame. Attach the quilt back to the take

up cloth leader in the same way, matching the center to the

take up rail center line on the  cloth leader. Tighten up the quilt

back rail so that layer is flat.

3.  Put a pin in the quilt top center

(top and bottom). Pin the quilt

top to the quilt top rail the same

way. Roll it all the way up.

PINNING ON A QUILT  (…continued)

   KATHY SAYS:  Keep your Block RockiT manual nearby while 

you’re quilting.  Don’t forget to check our helpful online 
videos found at videos.kathyquilts.com and YouTube!

QUESTIONS? CALL US:

 

(888) 826-0222

PINNING ON A QUILT 

   KATHY SAYS:   

This great tip is 
continued on the 
next page :)

QUESTIONS? CALL US:

 

(888) 826-0222

Pins

Quilt Back

Quilt Batting

Quilt Top

Take-Up 

Cloth Leader

TAKE-UP 

RAIL

 

QUILT BACK 

RAIL

 

QUILT TOP 

RAIL

 

Center Pin

Center of Leader

Center of Fabric

Straight or 

serpentine 

stitch helps 

hold layers 

in place

Quilt 

Back

Cloth Leader

Quilt Batting Quilt Top

Summary of Contents for Block RockiT







Reviews: