Kathrein UFS 903 sw Operating Manual Download Page 69

Page: 69 / 124

The “Timer list” view can be called up at

any time in EPG by pressing the

(red)

button. The following display appears
(example):

The recording schedule view shows you
all the recordings and reminders that
are scheduled (marked green).

The

buttons allow the

recordings to be sorted into “Once” or
“Repeated” recordings.

The cursor buttons (

) allow you to

select a recording/reminder.

Edit options for series recordings:

• Only this one selected episode of a

series recording will not be recorded

• No further selected episodes of a series

recording will be recorded

• Edit the selected recording

Editing options for other types of
recording:

• Scheduled recording is deleted

• Edit the scheduled recording

Press the

button to switch to the channel on which the recording/reminder is scheduled.

The

buttons allows you to skip backwards and forwards through the future scheduled recordings, a

day at a time. The

(red dot) button allows you to edit a recording/reminder that has been scheduled.

You have the following selection options (select with the

buttons and confi rm with the

button):

EPG (Electronic Programme Guide)

Summary of Contents for UFS 903 sw





























































































































Search results

Summary of Contents for UFS 903 sw

Reviews:

Brands by name

Popular brands

Kathrein UFS 903 sw, Operating Manual

Search results

Summary of Contents for UFS 903 sw

Reviews:

Brands by name

Popular brands