Kathrein UFS 903 sw Operating Manual Download Page 30

Page: 30 / 124

Connection and setup

user-defi ned:
If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB
was confi gured.

Use the

buttons to select the frequency range to be changed (low, high or limit frequency).

Use the

buttons or the number keys to set the exact frequency for which your LNB was confi gured.

Then press the

button to save your LNB selection.

Move to satellite

Use the

Taste to instruct the turntable to move to the selected satellite. As soon as the turntable

has found the correct satellite, you will see displayed in the top right of the screen the live signal of a
channel for the currently selected transponder.

Use the

button to go back to the “Satellite Selection Menu”. Press the

(green) button; the receiver

then automatically displays the selection menu for the channel search. Continue the fi rst installation
by selecting “Execute Channel search”.

Summary of Contents for UFS 903 sw





























































































































Search results

Summary of Contents for UFS 903 sw

Reviews:

Brands by name

Popular brands

Kathrein UFS 903 sw, Operating Manual

Search results

Summary of Contents for UFS 903 sw

Reviews:

Brands by name

Popular brands