25
Ch
Ch
Ch
an
an
an
ne
ne
nel
l
l
Se
Se
Se
ar
ar
arch
ch
ch
Individual items are selected using the
buttons. Changes to the current settings can be made
using the
buttons.
If you do not wish to perform a channel
search, press the
(green) button and
continue with the “Date and time” section
of the
fi
rst installation.
If you want to perform a channel search,
use the
buttons to select “Yes”.
Connection and set-up
Channel Search Mode
Only free-to-air channels can be searched for
Network Search
Use the
buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory stored transponders of the satellite(s) you previously
selected will be searched for new as yet unlisted channels. If you set the network scan to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and scanned for new channels in the same way as the existing transponders.
When you have completed all settings, press the
(green) button. The following on-screen displays
appear (example):
Transponder = frequency converter (see Short Technical Guide)
During the search you will see the
following on-screen display (example):
Newly found channels are identi
fi
ed
with the suf
fi
x “new” (see screenshot
example, right).
TV
TV c
h
hann
l
els
fo
fo
un
un
d
d
R
Ra
di
dio
ch
ch
an
an
ne
ne
ls
ls
f
f
ou
ou
nd
nd
Note:
You can cancel the search at any time by
pressing the
button.