Kathrein UFS 712si Operating Manual Download

Page: 23 / 72

ON-SCREEN DISPLAYS (OSD)

Channel information is shown for a few seconds each time the channel is changed (this can be

changed under “Settings”, “Adjust Displays”) or displayed continuously by pressing the

button.

The information for the current radio channel has the same layout.

Channel

names

Channel
number from
the overall list

Number of
soundtracks

(yellow)

button

Videotext/Teletext

available

$ = Encrypted

channel

Time

Display of start time for current
and next programmes

Press

twice to view information on the current channel, if transmitted by the channel provider. Use the

buttons to scroll through the pages. By pressing the

buttons you can obtain information on

the next following programmes on the current channel. Press the

button to exit the display.

Press the

(yellow) button once to view further soundtrack selection options, if these are transmitted

by the channel provider. Use the

buttons to scroll through the available selection options. Press

the

(yellow) button again, or press the

button to exit this display again.

CHANNEL MESSAGES

TV CHANNEL MESSAGES

RADIO CHANNEL MESSAGES

OPTION SELECTION

CHANNEL INFORMATION

Time progression bar for
the current programme

Selected

favourites list

Summary of Contents for UFS 712si









































































Search results

Summary of Contents for UFS 712si

Reviews:

Related manuals for UFS 712si

Brands by name

Popular brands

Kathrein UFS 712si, Operating Manual

Search results

Summary of Contents for UFS 712si

Reviews:

Related manuals for UFS 712si

Brands by name

Popular brands