Kathrein UFO Mini 87-18, Manual

Page: 14 / 16

6 / 8
Configuring
1. Install and start the USW 800 configuration software on the computer.
2. Configure all the head-end parameters as required. In this case:
–
The USW 800 will communicate with the master and detect the slave automatically.
– The current version of the USW 800 and the user guide are available free of charge at www.kathrein.com .
Technical data
Inputs
Sat-IF input 8 x F connectors, 75 Ω
Terrestrial/cable input 1 x F connectors, 75 Ω
Decoupling dB > 35
Return loss dB typ. 12
DiSEqC
TM
1.0 vert./horiz., low/high; sat. pos. (A/B/C/D)
Switching levels V/kHz 14/18, 0/22
Remote feed current for LNB mA
max. 250 (at F socket no. 3 and 7),
max. 60 (at F socket nos. 1, 2, 4, 5, 6, 8)
Remote feed current for active antenna (5 V) mA 50 (at F socket no. 9)
Frontend
DVB-S(2) 16 x
DVB-S(2)/-T(2)/-C 2 x
Frequency grid MHz 1
Input level range DVB-S(2) dBµV 45 ... 90
Input level range DVB-S(2)/-T(2)/-C dBµV 55 ... 100
Permissible level difference dB 20
Demodulation DVB-S
Standard EN 300 421
Frequency range MHz 950 ... 2150
Input symbol rate QPSK MS/s 1 ... 45
Code rate (Viterbi) 1/2, 2/3, 3/4, 5/6, 6/7, 7/8
Roll off % 35
AFC regulation range MHz ± 5
Demodulation DVB-S(2)
Standard EN 302 307
Input symbol rate QPSK MS/s 1 ... 45
Code rate (LDPC) 1/4, 1/3, 2/5
1)
,1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Input symbol rate 8PSK MS/s 1 ... 45
Code rate (LDPC) 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
Roll off % 10
2)
/20/25/35