936.3224/A/1207/54.68i
Istruzioni di regolazione
La regolazione del trasmodulatore Twin DVB-S2_QAM (QPSK/8PSK su QAM) viene effettuata attraverso il controllo dell'unità di
base UFG 404 o UFG 412 o UFG 412/R.
Versione software richiesta del controllo:
a partire dalla versione V 9.30
Effettuare il collegamento alla cassetta (contiene gruppo canali I e II) per regolare il controllo.
I tasti di seguito denominati si riferiscono al controllo (si vedano le istruzioni per l’uso delle unità di base UFG 404 o UFG 412
e/o UFG 412/R).
Nota:
Le impostazioni e i valori numerici illustrati di seguito sono da intendersi come un esempio e non
corrispondono necessariamente allo stato di consegna.
Nota:
In caso di sconnessione del controllo dalla cassetta senza salvataggio con il tasto «M», verranno
nuovamente attivate le impostazioni originariamente salvate nella cassetta.
Il
gruppo di canali desiderato (I o II)
viene selezionato dai tasti «<<» e/o «>>».
Il parametro desiderato viene selezionato attraverso i tasti «<» e/o «>».
Il
parametro selezionato
lampeggia nella visualizzazione.
L’
impostazione
viene effettuata tramite i tasti «+» e/o «-» ed eventualmente con il tasto «Cambia modo di impostazione» .
Il tasto «Sottomenu» consente di attivare e di uscire dai sottomenu.
L’impostazione viene infi ne
salvata
nella cassetta con il tasto «
M
».
Impostazione della lingua e interrogazione del numero di versione
Premendo il tasto «
F
» si accede al
menu sistema
dove è possibile impostare la lingua e interrogare il numero di versione.
I
1236
MHz
* P
TP
27.500
MS/s
3/4
QPSK
Uscita
* S21
306.00
MHz
6.900
MS/s
!
256
QAM
Menu principale (sono rappresentate tutte le icone)
****
Sistema
****
Impostazione della lingua
Selezione con +/-
Menu sistema
Sottomenu di «Impostazione lingua»
Lingua
Italiano
Nel menu sistema è possibile scegliere tra «Impostazione lingua» e «Numero versione» utilizzando i tasti «+» e «-».
Il tasto «Sottomenu» consente di attivare il sottomenu e di disattivarlo premendo più volte lo stesso tasto.
Nel sottomenu «Impostazione lingua» è possibile scegliere la lingua desiderata con i tasti «+» e/o «-».
È possibile effettuare le seguenti impostazioni: tedesco, inglese, francese o spagnolo
****
Sistema
****
Numeri di versione
Selezione con +/-
Menu sistema
Sottomenu dei «Numeri di versione»
Bootloader
4.00
Controllo
9.30
Nel sottomenu dei «Numeri di versione» è possibile selezionare i dati sopra elencati.
Si può uscire dal sottomenu tramite il tasto «Sottomenu». Il tasto «
F
» consente di uscire nuovamente dal menu sistema.
Nota:
Durante l’inizializzazione del gruppo canale, in alto a destra lampeggia un indicatore (*).
La seguente rappresentazione illustra l’aspetto della visualizzazione
dopo l’inserimento del controllo
:
Summary of Contents for UFO 372/TP
Page 66: ...936 3224 A 1207 66 68d ...
Page 67: ...936 3224 A 1207 67 68d ...