Kathrein UFO 372/TP, Instructions Manual

Page: 21 / 68

936.3224/A/1207/21.68e
1.12 Selecting the position of the output spectrum
The position of the output spectrum can be inverted in the QAM stage sub-menu.
The output signal QAM stage is selected using the “<” and “>” buttons.
Pressing the “Sub-menu” button activates the sub-menu; pressing the “Sub-menu” button again deactivates it.
The output spectrum is selected using the “<” and “>” buttons and adjusted using the “+” and “-” buttons.
I 1236 MHz TP
27.500 MS/s 3/4 QPSK
Outp. S21 306.00 MHz
6.900 MS/s 256 QAM
Main menu
** UFO 372TP-I **
Mode SAT Sig
Spectrum normal
“QAM stage” sub-menu
The following settings are available:
Spectrum normal
The output signal is output in the control position
inverse
The output signal is output with an inverted spectrum
1.13 Transport stream processor: Programme fi lter
I 1236 MHz P TP
27,500 MS/s 3/4 QPSK
Outp. S21 306.00 MHz
6,900 MS/s 64 QAM
Main menu
** UFO 372TP-I **
Filter on
OID off 09h
“Transport stream processor” sub-menu
“Filter” programme fi lter operating mode is selected in the TP (Transport stream processor) sub-menu.
The “TP” transport stream processor is selected with the “ < ” or “ > ” buttons and the sub-menu is called up with the “Sub-menu”
button.
The “Filter” programme fi lter is selected with the “ < ” or “ > ” buttons and is activated/deactivated with the “ + ” and “ - ” buttons.
The settings available are Filter “
on ” / “ off ”.
This sub-menu can be exited only when the cursor is on the “OID” parameter.
To do this, use the “ < ” and “ > ” buttons to select “OID” and press the “Sub-menu” button to return to the main menu.
When
Programme fi lter is set to “ on ”, a “ P ” appears at the top right of the main menu.
Programme
information
is read in
...
** UFO 372TP-I **
Filter off
OID off 09h
“Transport stream processor” sub-menu
When changing to the “Filter” sub-menu
To process the programming list for the programme fi lter, the current programme table is read from the transponder pressing
the “Sub-menu” button at the “on”/”off” parameter in the programme fi lter. A progress bar appears whilst this is being done.
As soon as the channel unit has successfully determined this information, the sub-menu for adjustment is displayed.
** UFO 372TP-I **
T / 001 / 009
Das Erste / -
Generate
** UFO 372TP-I **
T / 001 / 009
Das Erste / -
Generate
“Filter” sub-menu
“Filter” sub-menu