24 of 28
Operating the App
Client Mode
In the
Client mode
, the programmer can be integrated into an already existing
network.
1. In the app menu, select the menu item
Settings
.
2. Select the menu item
Wi-Fi Settings
.
3. Slide the switch next to
Client mode
to the right to activate the
Client mode
(
①
in figure on the right).
➯
You can enter the Wi-Fi settings of the WLAN access point which the
programmer is supposed to connect to:
●
Network name (SSID) of the WLAN access point (
②
)
●
Password of the access point (
③
)
●
Encryption (
④
):
~
Open
~
WPA (TKIP)
~
WPA (AES)
~
WPA2
~
WPA2-PSK (Mixed)
Tip
We recommend using the
WPA2-PSK
encryption because it is
universally compatible with very many WLAN access points.
●
IP address (
⑤
)
●
Subnet mask (
⑥
)
●
Gateway address (
⑦
)
1
2
3
4
5
6
7
4. Tap the button
Apply setting…
(
①
in the figure on the right).
➯
The changes are being saved.
Tip
You can reset the Wi-Fi settings to factory settings any time.
►
Tap the
Factory Settings
button (
②
in the figure on the right).
➯
The Wi-Fi settings are being reset to the factory settings.
1
2
5