Configuration manual Reader
8
Modifications, misprints and errors excepted.
English
2.
Description of the configuration parameters
2.2.4.
“MultiplexingAntennaport1...8”
Characteristics:
available from firmware:
v1.30.00
Data type:
Byte (8-bit)
Unit:
-
Value range:
0; 1-8
Description:
These eight parameters form the antenna multiplex list of the reader. Either an antenna port number (1 to 8) or a
zero can be entered in each of the eight list slots. If a zero is entered, the list slot is deactivated and the reader
skips to the next list slot. This is shown in the following diagram:
Inventory start
Index multiplex list := 0
Index multiplex list +1
no
yes
yes
no
Does the multiplex list
contain an entry and is
there a power configured
for this antenna port?
Perform inventory at a
specified antenna port
Has the end of the
multiplex list been
reached?
Inventory end
