10 / 12
Adjust azimuth
Drehen...Drehen...
Antenne empfangsbereit
4
4
5
4
5
Fig. 12: Setting the azimuth
Disassembling the Antenna Set
Risk of injury due to the sat tripod mast with the antenna fi tted tipping over!
►
If necessary, request a second person to assist you if, contrary to these instructions, you fold up the sat
tripod mast with the antenna still attached.
Crush hazard when pushing the tripod mast legs together!
►
When pushing the tripod mast legs together, hold the tripod mast by the mast tube above the joint
head.
1. Loosen the star grip screw (
①
in Fig. 5).
2. Remove the antenna together with the adapter joint from the sat tripod mast. If necessary, request a second person
to assist you to hold the antenna while you remove it from the tripod mast.
3. Loosen the star grip screw
(Ⓒ
in Fig. 3)
.
4. Pull out the extension slightly (
Ⓓ
in Fig. 3).
5. With your other hand, remove the engagement pin
Ⓑ
from the extension.
6. Insert the pin into the second pin hole from the top.
7. Allow the extension to slowly slide down into the mast tube until the engagement pin rests on the top of the tube.
8. Fold in the tripod mast legs.
9. Tighten the star grip screw on the sat tripod mast.
