11 / 8
Ideally the EXI 01 modem is operated in combination with the EXI 3508 multi-switch with integral modem. The terrestrial
distribution system of this multi-switch is specially matched to this application and thus off ers especially long range
capabilities for the installation (> 700 m for the data range). An integral high-pass fi lter for the terrestrial input prevents
undesirable propagation of your network data from a connected antenna.
Operation with a conventional multi-switch also poses no problems. In this case the EXI 90 external high-pass fi lter must
be screwed on to the terrestrial input, in order adapt the terrestrial distribution system.
To achieve optimum performance, make sure that all components of the overall distribution system (including the outlets
used) support the frequency range of 5 to 68 MHz.
Info on the coaxial distribution system
LED ...
Status EXI 01
“Power” LED
Lights up green
in operation
Lights up red
Stand-by
Is off
No power supply
“Coax/Link” LED
Lights up green
Connection established in the coax network (optimum
connection)
Lights up orange
Connection still OK
Lights up red
Bad connection - data throughput restricted
Is off
Damping too high (> 90 dB), cable breakage or no matching
network key
Ethernet socket
Left hand LED
Flashes orange
Ethernet activity
Right hand LED
Lights up green
GBit connection
Is off
at ≤ 100 MBit connection
Overview of the LEDs
Overview of buttons
Button is ...
Triggers the following action ...
Pairing
Pressed briefl y (1-3 seconds)
A further modem is connected
Pressed longer (approx. 12 seconds)
Modem is prepared for connection into a private network.
Network key is deleted
Reset
Pressed briefl y (1-3 seconds)
Reset to factory setting. The factory setting for the network
key is restored
Installation examples
EXI 30
Connection to a receiver and remote feed to the modem by
the receiver
EXI 30
Connection to a laptop/PC and power supply to the modem
by power supply unit
Hi-fi system
