14 / 36
• Attach the carrier arm to the antenna boom, as shown on the
drawing. Alternately tighten the wing nuts on the mast clip
fi
nger-
tight (
).
c) Installing the carrier arm
d) Installation of the parabolic antenna
• Now hang the parabolic re
fl
ector from the four securing bolts on
the carrier arm (see the diagram on the right) (
).
• Now
lightly
tighten the four bolts using the allen wrench (do this
by holding the allen wrench by the short end, see diagram on the
right) (
).
• Now turn the allen wrench round. If you now swing the
long
end
of the hexagon key (see diagram on the right) through about a
quarter of a turn, the bolts will be
tight
. If you have a
torque
wrench
available, tighten the bolts to about
4-5 Nm
(
).
Only tighten
slightly
!
First only tighten
slightly
...
...then turn
through about a
quarter of a turn
