8 / 16
Important notes for installation
Danger to life due to high voltage!
Wood screws may come into contact with live parts and cause danger to life from electric shock.
►
Never use the wood screws supplied with the CAP converter to install the CAP converter on another elec-
trical appliance (e.g. TV set).
Material damage to the device due to countersunk screws!
►
Never use countersunk screws for installation.
►
Use the wood screws supplied with the CAP converter.
Material damage to the device and malfunction due to overheating!
If the CAP converter is installed on another electrical device (e.g. TV set), the mutual heating may lead to
overheating.
►
Before installing the CAP converter on another electrical device, ask the manufacturer of the device or
refer to the documentation supplied with the device to fi nd out whether this is permissible and, if so,
which aids (screws etc.) are required/may be used.
Using other screws
If the supplied screws cannot be used due to the installa-
tion place or the condition of the installation place, please
refer to the fi gure on the right to select the correct screws.
It shows a cross-section of the screw holes of the CAP
converter. It also specifi es the required characteristics of
the fi xing screws which are inserted into the bracket of
the CAP converter, e.g. diameter, type of screw head, etc.
Installing the CAP converter
The distances of the drilling points can be seen in the diagram below.
Material damage to the device by overtightening the screws!
If you apply too much force when tightening the screws, you may damage the screw holes and the housing
of the CAP converter or any cables already connected to it.
►
Tighten the screws carefully.
Rear of the CAP converter
Front of the CAP converter
