48 of 64
First installation
Use the
buttons to make the basic settings for
the video and audio output of the receiver to the TV
set
During this process refer to the
operating instructions for your TV
set and take care to select only
those settings that your TV set
can process
Video Output via
The receiver outputs video via the HDMI socket on the unit's rear panel
HDMI / YPbPr Resolution
Here you can select the video resolution that will be output to the TV set The following selection options
are available:
● 1080p (resolution 1920 x 1080, full-screen images)
● 1080i (resolution 1920 x 1080, half-screen images)
● 720p (resolution 1280 x 720, full-screen images)
● 576p (resolution 720 x 576, full-screen images) or
●
Automatic
Force 576i (must be supported by the TV set otherwise you will not see a TV picture)
You can only and need only make this setting if you have selected the setting "Automatic" for "HDMI /
YPbPr Resolution". If for a programme that is transmitted in the format 720 x 576 (standard TV), the origi
-
nal format is to be transmitted to the TV set, select the "On" setting If the setting is "Off", the programme
may be automatically scaled up to the HDTV format 720p by the receiver
HDCP for free channels
Select here whether HDCP (digital copy protection) is to be constantly set to "On" with free channels or is
not to be activated, "Off"
TV control box via HDMI (CEC)
If you select “Off“, the TV set must be switched on or off separately If you select “On“, the TV set will be
switched on automatically as the receiver starts up (but only if the TV set was in standby mode) If the
receiver is switched off into standby mode, the TV set will also be switched to standby mode
The automatic switching on and off of the TV set by the receiver only functions if the TV set supports this
function.
