15
Installation, Connection and Setup
To
fi
t the F standard connector:
• Slot the cap onto the cable (see
fi
gure 1).
• Strip off the outer sheath of the cable, making sure you do not cut
through the braided shield (dimensions in mm) (see
fi
gure 2).
• Carefully bend back the braided shield (see
fi
gure 3).
Braided shield
Figure 1
Cap
Figure 2
Bend back
braided shield
and aluminium
foil
Figure 3
Pre-assembling the Cable
• Expose the inner conductor as shown in
fi
gure 4 (dimensions in mm).
Inner conductor
Figure 4
