background image

7

3.2 UFO

®

compact controller

The UFO

®

compact 

controller can be connected to any of the demultiplexers. However, it is to be noted that the 

controller only operates with the demultiplexers that belong to the same group to which it is connected. The usage 
of an older UFO

®

compact 

controller prior to software version 9.20 is in principle possible, however there may be 

connection problems with the channel units.
Only one control system can be active per group, this means that you can only access the group using one 
UFO

®

compact 

controller or with one USW 30. As the groups are independent of each other, several groups in a 

network can be controlled at the same time.

3.3 Network confi guration

Connect several UFX 314 using a network. If you want to integrate the devices into an existing network, you should 
consult the responsible network administrator to prevent problems from the start. Firewall and antivirus applications 
may adversely affect the function.

The network confi guration for the UFX 314 can only be undertaken using the controller software USW 30 and is 
described in section 7 of the manual provided with the software.

In the delivery status, every demultiplexer is set to “Zeroconf”. Microsoft Windows also uses this method if a fi xed 
IP address has not been defi ned and a DHCP server is not available.
The related standard was published by the IETF under “RFC 3927” 

1)

. The devices in the network select a spare 

IP address from the range 169.254.1.0 to 169.254.255.0 and use the network mask 255.255.0.0.
The USW 30 connects with a demultiplexer in the group using TCP port 9312 and can then communicate with all 
other multiplexers in this group over this connection. It does not matter to which device in a group the USW 30 
connects. Between the UFX 314 a TCP connection on port 9313 is used.
To establish a connection via a router, the router must forward port 9312 to a UFX 314.
The UFX 314 does not have any access protection for Ethernet or USB access, for this reason instead of simple 
port forwarding, the usage of a virtual private network (VPN) should be considered. You will fi nd information on 
VPN in the related specialist literature and on the Internet.

The “Multicast DNS” 

2)

 and “DNS Service Discovery” 

3)

 protocols used for the network search use Multicast packets 

on UDP port 5353. The network is searched by each UFX 314 to fi nd other devices in its group.

1)

 http://fi les.zeroconf.org/rfc3927.txt 

2)

 http://www.multicastdns.org/index.html 

3)

 http://www.dns-sd.org/index.html

Connect the power cable for the UFX 314 to the 
screw terminals in the power supply for the base 
unit

Summary of Contents for BN 20610071

























Reviews: