9
Restoring the factory default:
1.
Open the housing. Remove the batteries, and then press any button to
discharge any residual voltage.
2.
Set switch 2 to ON, reinsert the batteries. The tag reader signals the reset
(including the deletion of the added tags) with an audio signal followed by
two more signals.
3.
The status LED starts flashing. Set switch 2 to OFF again and close the
housing.
4.
Delete the tag reader from the sensor list of the alarm panel.
Please note:
•
After a reset, all added tags are also deleted from the tag reader.
•
Tags can only be deleted by resetting the tag reader to the factory default.
It is impossible to delete individual tags from the configuration of the tag
reader.
•
You can add an unlimited number of tags to the tag reader.
•
You can add a tag to an unlimited number of tag readers.
