11 of 28
5.1
Changing the TV or CATV measurement range using Discovery
Tip
You can change the TV or CATV measurement range only if there are no custom or auto-
matic memory maps created using
MANUAL MEMORY
or
AUTOMEMORY
.
1. Press
SETUP
or take steps 1 – 3 to open
CONFIGURATION MENU
, see
Changing brightness
.
➯
The configuration menu opens and the
METER
is active (marked in green).
2. Rotate the navigation wheel to select
TV
or
CATV
.
3. Press the navigation wheel to open the
TV
or
CATV
menu.
➯
The
TV
or
CATV
menu opens and the
LNB L.O.
menu item
is active (marked in green).
4. Rotate the navigation wheel to select
DISCOVERY
.
➯
The
DISCOVERY
menu item is active (marked in green).
5. Press the navigation wheel to select the
DISCOVERY
value.
➯
The
DISCOVERY
value is active (marked in green).
6. Rotate the navigation wheel to select between
TERR ONLY
(only DVBT) and
TERR&CABLE
(DVBT and DVBC) or
CABLE ONLY
(only DVBC) and
TERR&CABLE
(DVBT and DVBC).
7. Press the navigation wheel to save the selection.
8. Rotate the navigation wheel and press
BACK
to leave the
METER
menu.
9. Rotate the navigation and press
EXIT
to leave the configuration menu.
➯
The
TV
or
CATV
measurement range is changed.
