12 of 28
Configuration menu
5.2
Changing SCR user frequency
1. Press
SETUP
or take steps
1 – 3 to open
CONFIGURATION MENU
, see
Changing brightness
.
➯
The configuration menu opens and the
METER
menu item is active (marked in green).
2. Rotate the navigation wheel to select
SAT SCR
.
3. Press the navigation wheel to open the
SAT SCR
menu.
➯
The
SAT SCR
menu opens and the
LNB TYP
menu item is active (marked in green).
4. Press the navigation wheel to select the
LNB TYP
value.
➯
The
LNB TYP
value is active (marked in green).
5. Rotate the navigation wheel to select the
SCR/SCD2
function.
6. Press the navigation wheel to save the selection.
7. Rotate the navigation wheel to select
SCR USER
.
8. Press the navigation wheel to select the
SCR USER
value.
➯
The
SCR USER
value is active (marked in green).
9. Rotate the navigation wheel to select an
SCR
user.
10. Press the navigation wheel to save the selection.
11. Rotate the navigation wheel to select
SCR CABLE TEST
.
➯
The frequency of the selected user (Step 8) is measured.
