2 / 8
EXD 158 Twin
Single-cable multi-switch with 2 x 8
user bands and external power supply
unit
for the LNB supply
Kathrein Power Saving can be
switched on and off using the rotary
switch
NCF 18
Highly effi cient, short-circuit-proof
switched-mode power supply unit
Scope of Delivery
EXD 158 Twin
●
EXD 158 Twin
●
NCF 18
●
Instructions for Use
EXD 258 Twin
●
EXD 258 Twin
●
Instructions for Use
Transport and Storage
►
Transport and store the device in its original packaging.
►
Make sure there is no water condensation build-up.
Intended Use
The equipment described is designed solely for the installation of satellite receiver
systems.
Any other use, or failure to comply with these instructions, will result in voiding of
warranty cover.
EXD 258 Twin
Loop-through multi-switch to extend
the system by adding two single-cable
connections with 8 user bands each
Kathrein Power Saving:
As soon as there are no longer any
receivers active, a signal is generated
at the last multi-switch via the vertical
low trunk. This signal then switches
the LNB power supply off .
Optional power supply of the multi
switch using the NCF 18
(LNB is not
supplied!)
Hereby, KATHREIN Digital Systems GmbH declares that the radio equipment type
EXD 158 TWIN, order no.: 20510142/EXD 258 TWIN, order no.: 20510143
is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.kathrein-ds.com
Simplifi ed EU Declaration of Conformity
