Thank you for choosing a Katadyn portable water microfiltration system. The
Katadyn Combi Microfilter meets industry standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and Cryp-
tosporidium). It also reduces chemicals and improves the taste of water. The Com-
bi is Katadyn’s most multi-functional filter for all-round use. It is ideal for
1-4 persons while trekking, on journeys and on expeditions.
(Figure 1-1)
Input Barb backside
Ceramic Element
Plastic Sleeve
Bottle Adapter
Pump Handle
O-Ring
Pump Handle
Black Carbon Button
Carbon Cartidge
Cover of Carbon
Cartidge
Measuring Gauge
Output Barb
Faucet Attachment Kit Set-up
To attach the Combi to a water faucet:
1)
Position the black rubber gasket into the opening in the middle of the base.
Screw the Combi tight on the base.
2)
Insert the outlet tap into the smaller opening at the edge of the base.
3)
Slide red hose connector on to white hose with threads towards end of hose.
Attach the white hose to the input barb in the middle of the filter housing. Secure
by tightening hose connector clockwise.
4)
Unscrew the mixer jet from the water faucet and connect the diverter valve to
the faucet. Tighten the diverter valve to the water faucet. If diverter valve does
not fit your faucet, install using universal adapter. (Figure 3-1)
Note: Additional adapters can be found at your local hardware store if the
universal adapter included does not fit your faucet.
Normal Operation
1)
Turn faucet on. Switch diverter valve so that water runs out of outlet tap.
Note: The faucet will be drip for a few seconds after shut off.
2)
The flow rate of the Combi Plus depends on the available water pressure and
can be increased through additional pumping.
Warning: The Combi Plus has no return pressure regulating valve - the pressure built up at
the filter may exceed the pressure allowed for your other installations. Make sure the other
systems are protected by an overpressure valve.
For maintenance please follow the details of your Katadyn Combi filter.
Thank you for choosing a Katadyn portable water microfiltration system. The
Katadyn Combi Microfilter meets industry standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and Cryp-
tosporidium). It also reduces chemicals and improves the taste of water. The Com-
bi is Katadyn’s most multi-functional filter for all-round use. It is ideal for
1-4 persons while trekking, on journeys and on expeditions.
(Figure 1-1)
Input Barb backside
Ceramic Element
Plastic Sleeve
Bottle Adapter
Pump Handle
O-Ring
Pump Handle
Black Carbon Button
Carbon Cartidge
Cover of Carbon
Cartidge
Measuring Gauge
Output Barb
Faucet Attachment Kit Set-up
To attach the Combi to a water faucet:
1)
Position the black rubber gasket into the opening in the middle of the base.
Screw the Combi tight on the base.
2)
Insert the outlet tap into the smaller opening at the edge of the base.
3)
Slide red hose connector on to white hose with threads towards end of hose.
Attach the white hose to the input barb in the middle of the filter housing. Secure
by tightening hose connector clockwise.
4)
Unscrew the mixer jet from the water faucet and connect the diverter valve to
the faucet. Tighten the diverter valve to the water faucet. If diverter valve does
not fit your faucet, install using universal adapter. (Figure 3-1)
Note: Additional adapters can be found at your local hardware store if the
universal adapter included does not fit your faucet.
Normal Operation
1)
Turn faucet on. Switch diverter valve so that water runs out of outlet tap.
Note: The faucet will be drip for a few seconds after shut off.
2)
The flow rate of the Combi Plus depends on the available water pressure and
can be increased through additional pumping.
Warning: The Combi Plus has no return pressure regulating valve - the pressure built up at
the filter may exceed the pressure allowed for your other installations. Make sure the other
systems are protected by an overpressure valve.
For maintenance please follow the details of your Katadyn Combi filter.
Thank you for choosing a Katadyn portable water microfiltration system. The
Katadyn Combi Microfilter meets industry standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and Cryp-
tosporidium). It also reduces chemicals and improves the taste of water. The Com-
bi is Katadyn’s most multi-functional filter for all-round use. It is ideal for
1-4 persons while trekking, on journeys and on expeditions.
(Figure 1-1)
Input Barb backside
Ceramic Element
Plastic Sleeve
Bottle Adapter
Pump Handle
O-Ring
Pump Handle
Black Carbon Button
Carbon Cartidge
Cover of Carbon
Cartidge
Measuring Gauge
Output Barb
Faucet Attachment Kit Set-up
To attach the Combi to a water faucet:
1)
Position the black rubber gasket into the opening in the middle of the base.
Screw the Combi tight on the base.
2)
Insert the outlet tap into the smaller opening at the edge of the base.
3)
Slide red hose connector on to white hose with threads towards end of hose.
Attach the white hose to the input barb in the middle of the filter housing. Secure
by tightening hose connector clockwise.
4)
Unscrew the mixer jet from the water faucet and connect the diverter valve to
the faucet. Tighten the diverter valve to the water faucet. If diverter valve does
not fit your faucet, install using universal adapter. (Figure 3-1)
Note: Additional adapters can be found at your local hardware store if the
universal adapter included does not fit your faucet.
Normal Operation
1)
Turn faucet on. Switch diverter valve so that water runs out of outlet tap.
Note: The faucet will be drip for a few seconds after shut off.
2)
The flow rate of the Combi Plus depends on the available water pressure and
can be increased through additional pumping.
Warning: The Combi Plus has no return pressure regulating valve - the pressure built up at
the filter may exceed the pressure allowed for your other installations. Make sure the other
systems are protected by an overpressure valve.
For maintenance please follow the details of your Katadyn Combi filter.
