(5)
Ceramic Capacity
Ceramic capacity depends on water quality. The dirtier the water the more often you will
have to clean the element. This reduces the capacity of approx. 13'000 gallons (50'000
liters). If the gap of the measuring gauge fits over the ceramic it is time to replace the filter.
(Figure 2-3) Inspect the ceramic for cracks after cleaning, if you dropped the filter or if you
had freezing temperatures. If the filter shows cracks it will no longer protect you from mi-
croorganisms.
Ceramic Installation
Replacement filter elements are available from the dealer where you purchased your
Katadyn Combi.
1)
Remove ceramic element by turning the filter base at lower end of housing counter
clockwise one quarter turn (the bottom end of the bottle adapter may be used to aid
turning).
Attention: The filter housing can be under pressure - unfiltered water can splash out
while taking out the ceramic element.
2)
Remove new ceramic element from packaging.
3)
Insert the new ceramic element into the housing. Push turn clockwise one quarter turn.
4)
Flush ceramic element by pumping and discarding the first liter.
Activated Carbon Capacity
Activated Carbon capacity depends on water quality. Normal capacity of carbon is 50
gallons (200 litres). High chemical or odor concentration can reduce the capacity of the
carbon. Replace the carbon when you notice an unpleasant taste or odor after filtering or
after 6 months of constant use - whichever comes first. Use the black button on the front side
of the housing to keep track of when the carbon needs to be changed. Use a coin to adjust
to the adequate month.
111817-Kat-100590-INT.:073845-Kat-100590-INT. 2.5.2011 9:04 Pagina 5
