background image

2019-2076 
2019-10-10 

 

 

ChlorKing Saline Chlorination System, Model CHLOR-5.0 

 

CHLORINE GENERATOR 

 

CONTROLS BACTERIA AND ALGAE 

in 

Swimming Pool (and Spa) Waters 

 

COMMERCIAL 

 

A maximum of 283,900 L of water can be treated with 

ChlorKing Saline Chlorination System, Model CHLOR-5.0 

Maximum output of hypochlorous acid equivalent to 2.268 kg 

of free available chlorine per day 

 

For swimming pools, a range of 1.0 - 3.0 ppm of free available chlorine 

must be maintained. 

 

For spas, a range of 3.0 - 5.0 ppm of free available chlorine must be maintained. 

 

KEEP OUT OF REACH OF CHILDREN 

 

READ THE LABEL AND OPERATING MANUAL BEFORE USING 

 

REGISTRATION NO. 29088 PEST CONTROL PRODUCTS ACT 

 

WARNING: Operating the ChlorKing Saline Chlorination System, Model CHLOR-5.0, 

without water flow through the cell can cause a buildup of flammable gases 

which can result in FIRE OR EXPLOSION. 

 

WARNING: Do not use this device with bromide products.

 

NOTICE TO USER: This pest control product is to be used only in accordance with the 

directions on the label. It is an offence under the Pest Control Products Act, to use 
this product in a way that is inconsistent with the directions on the label.  

 

CHLORKING INC,  

2935 NORTHEAST PARKWAY  

ATLANTA, GEORGIA, U.S.A, 30360. 

1-800-536-

8180 

Summary of Contents for CHLOR-25





















Reviews: