21 Starting Installation
11.Use the inner hexagon spanner to remove the M6×16 screw located in the area as shown in the picture; take out the
support plate and one M6×45 screw. Fix the board onto the mechanical structure as shown in the picture.
12.Unscrew the U-shape bolts (two) on the top protection cover, put the three-in-one cable into the slot of the U-shape
bolts, and re-fasten the bolts onto the cover.
Attention
A 90cm-long HTC VIVE three-in-one data connecting cable needs to be reserved
at the lower end of the telescopic stick (see the mark in the picture)
support plate
Take out the screw
Screw - M6×45
