background image

06

Product use

: Keep the product safely away from liquids or containers holding liquids.

Do not place the product near fire or heat sources, nor leave it directly exposed to the sun. 
Do not insert items into any openings of the product.
Do not disassemble or modify this product or its accessories. 
To avoid mechanical damage, do not throw this product or its accessories.
If the product overheats, gets damaged or cannot be used according to the safety 
instructions of this user's manual, please contact our technicians or your local distributor. 
Avoid using this product after a rapid temperature change. 
If the product is moved between environments with widely varying temperature or 
humidity level, condensation might cause water to form on the surface or inside the 
product. To avoid damage, please wait till the water evaporates before using the product. 
Turn it on, only after the product adapts to the room temperature. 
Before using the product, check if it's in a normal state without cracks, scratches or other 
abnormalities. Before connecting the product to the charger, please confirm that the 
actual voltage and current are the same as these mentioned in the product parameters in 
this manual. If the two do not match, do not connect it. 
Any disassembly or modification of this product without permission will result in instant 
termination of the product warranty. 

 

Cleaning

: Using a damp cloth or water to clean the sensor surface is forbidden. Only a 

dry cloth can be used for that purpose. The straps can be cleaned with a damp cloth and 
dried before use. If symptoms such as itching, irritation, etc. appear, stop using the 
product and consult your doctor.

 

Radio Frequency Interference

: This product might emit radio waves that might 

interfere with the operation of nearby electronic equipment. If you are wearing a 
pacemaker or any other implantable medical device, consult your doctor or your medical 
device manufacturer before using the product. In order to minimize radio frequency 
interference, use only accessories approved by the original manufacturer. Do not use at 
the same location, or together with any other antenna or transmitter.

Summary of Contents for KAT Ioco LC01





























Reviews: