background image

15

14

MAINTENANCE

1

Release the screw at the top of the cover 

plate and remove the cover plate.

2

Open the battery compartment located 

at the back of the cover plate.

BATTERY 

COMPARTMENT

3

Replace the used battery with a 

new 9V battery (Lithium battery is 

recommended).

4

Close the battery compartment and refit 

the cover plate

Battery replacement instructions – battery powered model only only
When the battery weakens, the LED indicator light will blink at a constant rate. 
The battery must be replaced within two weeks.

To replace the battery:

BATTERY REPLACEMENT

Filter cleaning instructions

This faucet is provided with one stainless steel filter preventing foreign particles to enter 
the lines. If the water flow has decreased, this can be because the filter is clogged. 
The filter can be cleaned as follows:
1. Shut-off the water shut off valve (angle valve).
2. The filter is located between the solenoid housing and the shut off valve nut.
3. Remove the filter and wash it under running water.
4. Reassemble the parts. 
5. Make sure that there is no water leakage.

Care and cleaning of chrome and special finishes
DO NOT 

use steel wool or cleansing agents containing alcohol, acid, abrasives, or the like. 

Use of any prohibited cleaning or maintenance products or substances could damage 
the surface of the faucet. For surface cleaning of faucet use ONLY soap and water, then 
wipe dry with clean cloth or towel. When cleaning bathroom tile, the faucets should be 
protected from any splattering of harsh cleansers.

Summary of Contents for PETRA Q KSL00399












Reviews: