3
2
PRE-INSTallaTION INFO
PaCk CONTENTS - RONDa wM / PETRa wM
Familiarize yourself with the part names and confirm that the parts are included.
1 X SOaP TaNk wITH BOTTlE SUPPORT
aND PUMP aSSEMBly
1 X BODy aSSEMBly FOR RONDa wM
SOaP DISPENSER
1 X BODy aSSEMBly FOR PETRa wM
SOaP DISPENSER
1 X BaTTERy BOX FOR 6XD alkalINE
BaTTERIES /12V TRaNSFORMER
BaTTERy
VERSIONS
TRaNSFORMER
VERSIONS
1 x M 4 x 4
Set Screw
1 x M 4 x 4
Set Screw
1 x quick
connection
fitting
2 x Screw
3.5x1 1/4”
Check contents
Separate all parts from the packaging and check each part with the “Pack contents”
section.
Make sure all parts are accounted for before discarding any packaging material.
If any parts are missing, do not attempt to install your touch free soap dispenser until you
obtain the missing parts.
Warnings
Do not install the system facing a mirror or any other electronic system operated by an
infra-red sensor.
To prevent reflection problems, it is recommended to keep a minimum distance of
300 mm between the soap dispenser and any other objects.
Liquid soap dispensers, with proper care, will provide long term trouble free service.
Quality liquid soap of recommended viscosity and pH levels are the main factors for
smooth operation of your dispenser. If needed, use a viscometer to verify the viscosity
of your soap to ensure maximum benefit. The recommended range for liquid soap
viscosity is 100-3800 cPs. Thicker liquid soap flows slower and inhibits the pump valve,
causing strain and damage.
Liquid soap dispensers are suitable for use with any generic liquid soap of the correct
viscosity and pH. The pH level of all soap used in our liquid soap dispensers should be
between 6.5 to 8.5. Lower levels will cause corrosion to the metal dispenser and even the
rubber and plastic components. Higher pH levels will cause swelling to rubber parts and
degradation of plastic components over time.
IMPORTANT: Keep in mind that when using the faucet installed next to the soap
dispenser, the user hands should not interfere with the soap dispenser sensor
detection area.