SAFETY SWITCH INSTALLATION
© 2019 Kason Industries, Inc. IS-8600EZ-200 Rev 6 03/19
kasonind.com | 1.800.935.2766 | PAGE 4
8600EZ Power Drive
Single Doors and Bi-Parting Doors
Part Number: 8600*
Attach safety switch to plate using screws and locknuts as shown in
Fig. 9
. Do not overtighten screws or switch damage can
result. Slide plate under flat washer and against upper body until it just touches upper blade, then attach using #8 screw (87). Tighten
right side nut to secure upper body and plate to trolley.
Fig. 9
Fig. 10
shows how to remove safety switch electrical cover for wiring.
See wiring diagram on page 14. Wire N/C and common
contacts of switch in series with safety stop button, using NEC rated control wire. Secure wire to door and wall as needed, and include
slack loop for door.
Fig. 10
