RGBC5 WATERGLOW LIGHTING MANUAL
11
WARRANTY
REPAIR
Warranty Policy
Warranty period: RGB3C5, RGB6C5 = 2 year Limited Warranty. Kasco® Marine, Inc. warrants this light kit
to be free from defects in material or workmanship under normal use and service. The Kasco Marine, Inc.
obligation under this warranty is limited to replacing or repairing free of charge any defective part within the
warranty period from the date of shipment. Customer shall pay shipping charges for returning the unit to
Kasco.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND ANY OTHER OBLI-
GATION OR LIABILITY WHATEVER ON THE PART OF KASCO MARINE, INC. AND IN NO EVENT SHALL KASCO
MARINE, INC. BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES.
Warranty is void if:
• The light kit is not maintained properly according to the Maintenance Recommendations supplied in this
Manual.
•
The lights, control box, or power cord are altered in any way from original shipment. Cuts in the power
cord are not covered under warranty.
• The light kit is damaged by unauthorized tampering.
Warranty Claim Procedure
The best method for establishing warranty period is by keeping your original receipt and registering the
under the Warranty Information section.
Once warranty coverage has been established, the light kit may be sent to Kasco Marine or any Kasco Au-
thorized Repair Center for evaluation and repair.
The LED light fixtures are sealed and do not require any physical maintenance other than cleaning.
If a fixture fails to operate it can be removed and the included sealing cap installed onto the waterproof
connector of the power cord. This will allow you to continue to operate your light kit with two fixtures while
a replacement fixture is procured. Utilize caution when removing the shrink tube from the connector. Only
perform this removal/replacement with all equipment disconnected from the power source.
Any required repairs must be performed by Kasco Marine. Any alterations or changes made to Kasco units
by an unauthorized source will void the warranty. This includes tampering with the unit, power cord, and/or
control box.
A physical Kasco Repair Form must be included with any equipment sent to Kasco or an Authorized Repair
able, include your name and physical address for return delivery of the repaired light kit and a daytime
phone number and/or e-mail address for correspondence regarding the warranty claim.
Note: Visually inspect the power cord for any cuts, rodent chews, etc. to determine if it should be included
in the repair shipment. The cord may be needed by the shop to diagnose the failure.
Once warranty coverage has been established, the equipment may be sent to any Kasco Authorized Repair
Center or to Kasco at the address listed on the repair form.
Back to Contents