RGBC5 WATERGLOW LIGHTING MANUAL
4
MOUNTING INSTRUCTIONS
1.
Attach the bracket (F) to the light fixture (A) by fitting the head of the 10-32 x 1/2’’ hex screw (G) into the
tabs on each side of the fixture. Place one bracket O-ring (E), one #10 lock washer (D), and one thumb
nut (C) on each #10 screw outside the bracket. Tighten the thumb screws on each side hand tight only.
Repeat this step for all fixtures.
2.
Slide bracket into the top flange on the snap-on clip (H) until it clicks into place and is secure.
For 1/2, 3/4, & 1HP AF units,
use alternate hardware instead of the snap-on light clip, following the
directions on page 6.
D
E
G
C
A
F
Back to Contents