LEDC11 MANUAL
5
MOUNTING INSTRUCTIONS (CONT.)
3. (Optional) Place lens caps over the light fixture (C) as shown. Ensure the cap is seated all the way down
onto the fixture housing, as shown. Make sure the fixture and lens are clean before installing the lens
cap. Repeat for all fixtures.
4.
Slide bracket into the top flange on the snap-on clip (J) until it clicks into place and is secure.
For
1/2, 3/4, & 1HP AF
units, use alternate hardware instead of the snap-on light clip, following
the directions on page 7.
J
A
B
C
Back to Contents