7
2: 9 static color modes. White, Red, Green, Blue,
warm white, Amber, yellow, cyan, magenta. Pressing
the desired color will set the RGB controller output to
that color and will remain on that color. Repeatedly
pressing the color will dim the color from: 100%,
50%, 25%, 12%, 6% and cycle back to 100%.
3: Automatic sequencing modes: Selecting one of
these modes will automatically sequence the colors in
one of three modes:
Flash – jump to next color (7 colors)
Bloom- transition from color to color (3colors)
Smooth – smooth transition from color to color (7
colors)
4: S+, S- button slow down or speed up the automatic
sequencing of the 3 automatic modes.
5: Music input control
The RGB controller is capable of changing colors
based on sound input. The controller has a 3.5mm
audio jack, and a microphone built into the controller.
The microphone input is adjustable with a level
sensitivity dial.
The remote control has 3 automatic music modes:
FT – Fast track, color change is fast change
MT – My track, color change is medium
Changing speed
CT – Cool track, color change is slower and
smoother than FT, and MT.
The Audio input jack is compatible with your
headphone jack on a smartphone, MP3 player, or a
pre-amp type output. Do not connect to a line level
(amplified speaker) output.
A 3.5mm Y adapter will allow you to connect your
The Kasco C-85, C-95, and 3phase control panels use
a timer for controlling the light output. Ensure the
light timer is set as required. Refer to your fountain
owner’s manual for timer setting instructions.
5. Now, the light kit is ready for operation.
With the RGB controller door open you will see a red
LED “Power” indicator on the RGB control module.
If this indicator is not on, then power is not being
sent to the RGB control box. Check that the C-25 is
energizing the light receptacle.
6. Once you verify power to the RGB control
box. You are ready to test the lights for functionality.
The following steps explain how to use the remote
control to change function of the RGB lights.
Operating your RGB control with remote
1. The RGB controller is operated with the
included remote control. The controller will operate
in the last mode set until it is changed with the remote
control.
2. Figure 1 details the remote control’s
Button functions. The Green signal indicator (on
the RGB controller) will flash while the remote is
communicating to the controller.
Fig.1
Button function:
1: Power On/Off. Press the button once to turn on,
again to turn off. The controller will remain off if
turned off with the remote. Turning the controller on
with the remote will allow the fountain control box to
control the lights.
