LED3C11, LED6C11 WATERGLOW COMPOSITE LIGHTING
MANUAL
884012 / 2021.1.1
7
ALTERNATE MOUNTING INSTRUCTIONS
For J/VFX units:
Included with the light kit is optional hardware for use instead of the snap-on light clip. Assemble parts K, L, M, and N as shown in the
diagram below and tighten until secure. 7/16’’ socket and wrench required.
For 1/2, 3/4, & 1HP AF units:
Use alternate hardware instead of the snap-on light clip, following the directions above and continuing to step 6 on page 6.
For Large Surface Aerator units:
Supplementary hardware is required in order to mount RGBC5 light fixtures to a large (2HP+) surface aerator. Use the additional hard
-
ware kit (P/N
840303
for 3 light fixtures or
840306
for 6 light fixtures).
These kits are sold separately� Contact Kasco Marine at sales@kascomarine�com or your local distributor for order information�
Fig. 12
Back to Contents
