LED3C11, LED6C11 WATERGLOW COMPOSITE LIGHTING
MANUAL
884012 / 2021.1.1
4
B
A
MOUNTING INSTRUCTIONS
1�
Attach the bracket (H) to the light fixture (C) by fitting the head of the 10-32 x 1/2’’ hex screw (I) into the tabs on each side of the
fixture. Place one bracket O-ring (G), one #10 lock washer (F), and one thumb nut (E) on each #10 screw outside the bracket.
Tighten the thumb screws on each side hand tight only. Repeat this step for all fixtures.
2�
(Optional) If you want to use one of the color choices instead of the standard soft white light, peel the protective lining from both
sides of the colored lens (B) of your choice. Place the lens inside the lens cap (A) making sure the 3 flaps are holding the lens in
place. Repeat this step for all lens caps. Continue to Step 3.
No gap
Flaps behind lens
Fig. 2
Fig. 3
Fig. 4
Back to Contents
