4
• #10 x 1” long or longer screw(s) for mounting the
control panel (4)
• 7/16” Socket & Wrench (1)
• 7/16” Wrench (1)
• 9/16” Socket & Wrench (1)
• 9/16” Wrench or adjustable crescent wrench (1)
• Flat head screw driver (1)
Assembly Instructions
1. Remove all contents from package and place on
a clean, flat surface. Inspect the shipment for any
damages. If damages are found, immediately notify
your carrier and your Kasco Marine, Inc. representa-
tive. Next, cross reference the parts included in the
shipment with the Parts Included sheet in this manual.
Make sure you have all the parts needed. If any short-
ages are found, contact your Kasco representative
immediately.
2. Arrange the three Float Sections (Part #B1) upright
(plug on bottom) so the overlap of one section aligns
with the next section and loosely push the three sec-
tions together to form a continuous ring.
8400JF, 3.1JF, 2.3JF, 3.3JF
5.1JF, 5.3JF, 7.3JF
Control Panel in separate box (1) (if purchased)
Set of Interchangeable Nozzles (5) (Diagrams)
#
Item
Part #
Qty
1
#6 x 1/2” Self Tap Screw
820405
3
2
3/8” x 4” bolt
820090
1
3a Linden Nozzle (2, 3 HP)
820110
1
3b Linden Nozzle (5 HP)
820109
1
3c Linden Nozzle (7.5 HP)
703320
1
4a Redwood Y Insert (2 HP) (in #7)
820170
1
4b Redwood Y Insert (3 HP) (in #7)
820332
1
4c Redwood Y Insert (5 HP) (in #7)
820352
1
5
Juniper Nozzle
820140
1
6
Willow Nozzle
820150
1
7a Redwood/Spruce Nozzle (2 HP)
820160
1
7b Redwood/Spruce Nozzle (3 HP)
820330
1
7c Redwood/Spruce Nozzle (5 HP)
820350
1
8a Sequoia Nozzle (5 HP)
820130
1
8b Sequoia Nozzle (7.5 HP)
703200
1
9
3/8” x 2.5” Bolt
820095
1
8400JF, 3.1JF, 2.3JF, 3.3JF Nozzle Diagram
5.1JF, 5.3JF Nozzle Diagram
7.3JF Nozzles include linden and sequoia.
NOTE: Extra hardware may be included.
Tools & Supplies Needed
• Anchors or stakes for installing unit (3)
• Philips head screw driver for mounting C-85
• Electrical Supply near pond on a post with room
for mounting the control panel
• Three 12” galvanized pipe for weighting ropes
(optional)
