1/2HP-1HP AERATOR & CIRCULATOR MANUAL
7
10.
Turn the unit upside down and position the bottom screen (H) flush with the float.
11.
Fasten the bottom screen to the float using the 3/8"-16 x 2-1/2" screws (F), 3/8" flat washers (G), bottom
screen clips (I), and 3/8"-16 nuts (J).
J
G
I
G
F
Position the clip flanges
on either side
of a vertical bar
12.
Loop the mooring lines through either two or three evenly spaced holes on the float.
13. Attach the strain relief to the line closest to the cord. Make sure to clip both the loop and one side of the
rope between the knot and the float to ensure the clip doesn't move down the rope.
14. Continue to aerator installation instructions on page 12.
11
12
13
ASSEMBLY INSTRUCTIONS (AERATOR, CONT.)
If your cord does not have a strain relief
clamp and chain attached, you can secure
the cord to one of the float holes.
Back to Contents
