1/2HP-1HP AERATOR & CIRCULATOR MANUAL
10
4.
Angle the unit as desired by aligning one of the three the holes in the flanges with the corresponding
holes in the brackets. Secure the can strap to the brackets with the 3/8”-16 x 1” serrated flange screw (F)
and 3/8”-16 serrated flange nut (G) to fix the unit in one of the angles below.
5.
Place the float on a stable surface with the flat side down and use four 1/4”-20 x 1/2” serrated flange
screws (E) to secure the mounting brackets (B) to the float.
Upward angle: Align the brack-
et and flange holes furthest
from the cage to angle the unit
toward the float in the water
(below).
No angle: Align the center holes
in the brackets and flanges to
angle the unit straight ahead in
the water (below).
Downward angle: Align the
bracket and flange holes closest
to the cage to angle the unit
away from the float in the water
(below).
ASSEMBLY INSTRUCTIONS (CIRCULATOR, CONT.)
G
F
F
G
F
G
E
B
Back to Contents
