background image

  

 

 

 

 

 

 

 

www.kasava.io 

[email protected] 

 

1) Insert Micro SIM Card and Micro SD Card as shown, ensuring both cards are fitted flush into the camera. 

        

 

 
2) Select the position for the forward-facing camera to be fitted to the windscreen. The camera will ideally be 
positioned behind the rear-view mirror, but if this is not possible then ensure the camera is mounted as high 
as possible but with the camera still positioned within the windscreen wiper area. 
 
3) Ensure the windscreen glass is clean and dry at the position the forward-facing camera will be positioned. 
Remove  the  plastic  film  from  the  adhesive  pad  and  stick  the  camera  to  the  windscreen,  ensuring  it  is 
positioned level. Rotate the camera position to point slightly downwards the road. 

 

 
4)  Ensure  the  windscreen  glass  is  clean  and  dry  at  the  top  corner  of  the  passenger  side  of  the  vehicle. 
Remove the plastic film from the adhesive pad of the GPS antenna and stick to the windscreen as shown. 
 
5) Connect the GPS antenna to the forward-facing camera and tuck the cabling into the ceiling fabric. 

 

 
6) Locate your vehicles fuse box It is usually located on the driver side, below the steering wheel. Connect 
the powers supply to the forward-facing camera and run the cabling along the ceiling fabric. 

 

Summary of Contents for KDC404






Reviews: