www.kasava.io
7) Open the vehicle door and tuck the cabling under the door seal, running the cabling down towards the
vehicles Fuse Box.
8)
•
Connect the “yellow cable (+)” to a fuse. It must be connected to a fuse that has power at all times.
•
Connect the “red cable (+)” to a fuse. It must be connected to a fuse that has power only when you
start the engine.
•
Connect the ground cable to the car body or battery negative.
Finishing Up
Start your vehicle ignition and wait for your camera to begin recording.
Name
KDC404
Booting
Solid green LED
Not recording (sleep mode)
Solid green LED
Recording
Pulsing red LED
Help and Support
Kasava is here to assist with all aspects of camera operation and installation. If you require any assistance
or have any queries regarding Kasava products, please contact us at [email protected]
