7
FIRST TIME IRONING
1.
Remove any protective films or stickers from the sole plate and the iron body.
2.
Unwind and straighten the power cord.
3.
Fill the iron as described in the section of “How To Fill Water”.
4.
Connect the iron to a suitable socket.
5.
Turn the temperature dial in clockwise direction to (max) position; pilot light will glow to
indicate that the iron is heating up.
6.
Pilot light will go off when the required temperature is reached.
7.
Move the steam control knob to position; steam starts to come out from the vents on
soleplate.
8.
Begin first time ironing with an old towel.
9.
When the water tank is empty and there is no more steam can be produced, it means the
preparation work is completed and the iron is ready for proper use.
SPRAY
This function can be used at any time and it does not affect other functions.
1.
Fill the iron as described in the section of “How To Fill Water”.
2.
Aim the nozzle to the garment.
3.
Press the spray button.
Note:
It may be necessary to press the spray button a few times to start the function.
DRY IRONING
1.
Connect the iron with a suitable socket.
2.
Move the steam control knob to position.
3.
Turn the temperature dial in clockwise direction, select ‘
●
’ (1 dot), ‘
●●
’ (2 dots) or ‘
●●●
’ (3
dots) according to the recommendation of the garment label.
4.
Pilot light will glow to indicate that the iron is heating up.
5.
The pilot light will go off when the required temperature is reached.
6.
The iron is ready to use.
7.
After used, turn the temperature dial in anti-clockwise direction to ‘MIN’ position
8.
Disconnect the iron from the socket.
9.
When the iron gets cool completely, store it vertically in a safe place.
Figure 4
