11
BUILD-IN ANTI-SCALE SYSTEM
The built-in anti-scale cartridge is designed to reduce the build-up of lime scale which occurs
during steam ironing. This will prolong the working life of your iron.
Note
: The anti-scale cartridge will not completely stop the natural process of lime scale build-up.
EMPTYING THE WATER TANK
1.
Disconnect the iron from socket.
2.
Move the steam control knob to position.
3.
Open the water inlet cover and remove water from water tank as (Figure 9).
4.
Shake it to remove any remaining water out of the filling hole.
5.
When the iron gets cool completely, store it vertically in a safe place.
MAINTENANCE INSTRUCTION
CLEANING THE IRON
1.
Disconnect the iron from the socket and allow the iron gets cool completely.
2.
Use a dry cloth or non-scratching cleaner to remove any deposits on the soleplate or the iron
body.
Note:
1. Never use sharp or rough objects to remove the deposits on the soleplate.
2. Never use any abrasive, vinegar or descaling agents to clean the iron.
TROUBLESHOOTING
If the iron does not perform well, please check the following points.
Problem
Possible Causes
Solutions
The iron is plugged in but the
soleplate is cold.
Socket does not work.
Plug into another socket.
There is a connection problem.
Check if the plug is connected
to the wall socket properly.
The temperature has been set
to' MIN' position.
Turn the temperature dial to the
required temperature.
No steam comes out.
There may not be enough water in
the water tank.
Fill the water tank,see “HOW
TO FILL THE WATER”.
Steam knob is in
position.
Turn the steam control knob
to
position.
No steam burst comes out.
There may not be enough water in
the water tank.
Fill the water tank,see “HOW
TO FILL THE WATER”.
First time usage.
Press the burst of steam
button few times until the
steam burst comes out.
Figure 9
