KARMETAL KMT 400 KSA, Operation Manual

Page: 20 / 51

20
VERTICAL CUTTING SPEED
VISE OPEN-CLOSE
START BUTON
BLADE CUTTING SPEED
BOW UP
VISE MANOMETER
VISE PRESSURE ADJUST
ELECTRICAL WARNING LAMP
COOLANT WATER ON-OFF
EMERGENCY STOP
BOW DOWN
CHAPTER V: OPERATION
In this section, the functions of the machine will described to guide the operator to become
familiar with the machine and its components.
1- Control Panel
The following figure shows a general view of the machine control panel. The control elements on the
panel will be described next.
Main Power Switch
The main power switch is located on the door of the control panel. When this switch is turned
on, the LCD display comes on, indicating that the machine is ready to operate.
Emergency Stop
The "Emergency stop" push button stops all functions of the machine. The machine will not
function until "Emergency stop button’ is released. To release the emergency button, turn it in
the direction indicated on its hub.
Caution: The "Emergency stop" push button does not disconnect the machine from the main
power supply. To avoid from serious injury or death due to electricity shock, turn the main
power switch off or disconnect the machine from the main supply before servicing it.