KARMETAL KMT 400 KSA, Operation Manual

Page: 11 / 51

11
3.1. Cover Switch
This switch provides to shut down the machine while the bow cover is open. Running the
machine may cause wounding and serious gashes. Machine gives aural warning while the
cover is open.
3.2. Down Limit Switch
This switch is used to adjust the bow’s nadir to goes down. Down limit switch is a factory
setting. Please do not tinker with the down limit switch.
3.3. Top Limit Switch
Top limit switch is an adjustable switch and is used to adjust the bow’s apex to go rises up.
3.4. Hydraulic Band Tension Switch
This switch is used for to stop the machine while the blade pressure gets smaller than adjusted
ones. The main causes of decrease in pressure are; dulling, cracking or breaking of blade.
Operating the machine under these conditions endanger the operator.
3.5. Electricity Panel Cover Switch
This switch is used to stop the machine while the cover is open. Operating the machine may
causes to electric shocks while the electricity panel cover is open. Machine gives aural
warning while the cover is open.
3.6. Emergency Stop Button
Emergency stop button, places on the operator control panel- near the
main switch, is red button and you can see it easily. In emergency
cases, press to this button to stop the machine. Machine does not run while the button is
pressed. To rerun the machine, please turn left and release the button.
MAIN
SWITCH EMERGENCY
BUTTON